Search Results

In recent years, the demand for high-speed/high-bandwidth communication for in-vehicle networks has been increasing. This is because the usage of high-resolution screens and high-performance rear seat entertainment (RSE) systems is expanding. Additionally, it is also due to the higher number of advanced driver assistance systems (ADAS) and the future introduction of autonomous driving systems. High-volume data such as high definition sensor images or obstacle information is necessary to realize these systems. Consequently, automotive Ethernet, which meets the requirements for high-speed/high-bandwidth communication, is attracting a lot of attention. The application of automotive Ethernet to in-vehicle networks requires that technology developments satisfy EMC performance requirements. In-vehicle EMC requirements consist of two parts: emission and immunity. The emission requirement is to restrict the electromagnetic noise emitted from vehicle.

A very difficult problem exists regarding windshield shape, and that is to create a balance between aerodynamics and optical distortion. To assist in solving this problem, this study, concerning the characteristics of visual perception for the optical distortion when drivers receive visual information through a windshield, was carried out. In this study, the windshield area was divided into 4 zones from the viewpoints of the level of drivers' fixation frequency and types of objects observed. Distortion was defined as the gap angle ( distortion angle ), which crossed the lines of a grid board with and without a windshield, and distortion angles were measured on a total of 4 windshields. Four drivers indicated areas in each windshield in which they felt the area was distorted. As a result, the thresholds of optical distortion were shown as a function of the horizontal and vertical distortion angles by discriminatory analysis.

Vehicle interior wind noise is typically managed through the overall exterior geometry of the vehicle, mirror shape and mounting location, sealing features and glass thickness and damping. Prior research has distinguished between contribution of fluctuating pressure due to air turbulence as compared to acoustic pressure to a passenger vehicles exterior at highway speeds. Because of the large difference in propagation speed between turbulent and acoustic pressure for on-road passenger vehicles, the structural response of the glass to turbulent versus acoustic pressure is not the same. The acoustic coincidence frequency of door glass is typically in the 2-3 kHz range. Turbulent coincidence frequency is much lower, and the effective transmission loss (TL) of the glass depends on the mix of turbulent and acoustic pressure on the exterior surface of the glass.

Certain dimensional factors and a method for evaluating dimensional errors have been developed to improve the service life of the Rzeppa universal joint. The Rzeppa joint Spalling life is extended by disposition of the balls on a constant velocity plane under loading conditions which include proper determination of the offsets of the ball grooves and the windows of the cage. The ball center containment ranges, which consist of the grooves of both inner and outer races, can be affected by dimensional miscalculation of components. Moreover, the extent of scatter in the ball center containment ranges has a remarkable effect on the Rzeppa joint service life.

The liquid crystal day & night mirror with excellent reflective characteristics has been developed. The day & night mirror using Guest-Host liquid crystal devices improves the performance of rear view mirrors. Effects of primary factors on reflective characteristics of the liquid crystal day & night mirror have been investigated. Results are as follows. (1) The reflective characteristics at wavelength of about 555 nm are important for the selection of liquid crystals and dichroic dyes. (2) The reflective characteristics are improved by decreasing the reflectivity of glass substrate. (3) The reflective characteristics are improved by increasing the reflectivity of reflector.